Important Update: Cohesity Products Knowledge Base Articles
All Cohesity Knowledge Base Articles are now managed via the Cohesity Support Portal: https://support.cohesity.com/s/searchunify. The Knowledge Base articles available here will not reflect the latest information or may no longer be accessible.
VMware Instant Recovery fails with Status 130 due to network connectivity failure between ESX host and Restore Host
Problem
When performing VMware Instant Recovery it may fail with Status 130 when the ports required to connect to the NFS server created by NetBackup are not opened between the ESX and the Media Server.
Error Message
Job Details:
Error bprd Failed to mount a backup image on the server <ESX_Host> system error occurred(130)
VMware vSphere client reports error during NFS mount:
NFS mount <backup_host>:/NBUFS_F_<ESX_Host>_<backup_host> failed: Unable to connect to NFS server
Cause
Firewall between the ESX host and the restore host was blocking port 7394 (nbfsd) and/or 111 (portmap).
Solution
Open TCP ports 7394 and 111 from the target ESX server to the media server
Related Knowledge Base Articles
Was this content helpful?
Translated Content
Please note that this document is a translation from English, and may have been machine-translated. It is possible that updates have been made to the original version after this document was translated and published. Veritas does not guarantee the accuracy regarding the completeness of the translation. You may also refer to the English Version of this knowledge base article for up-to-date information.