Description
When creating an SRT on a Windows boot server, a version of Windows ADK 1607 is automatically downloaded and installed.
- This behavior is common from NetBackup 10.1 to 11.0.
- The BMR boot media created using this SRT will be based on the Windows ADK 1607 version, so the BMR restore environment must have hardware that supports the Windows ADK 1607 version (Windows 2016 equivalent).
Note:
In some environments where there is no Internet connection, the ADK must be downloaded and installed manually.
In this case, the Windows ADK 1607 version must still be installed manually from this location:
Download and install the Windows ADK
https://learn.microsoft.com/en-us/windows-hardware/get-started/adk-install
Scroll down to find ADK for Windows 10 version 1607 from the Other ADK downloads section:
Note: In the Windows Control Panel the ADK version should appear as 10.0.14393.0.
If the version is ADK 10.0.14393.8069 see the article below:
- Initial SRT creation on a Windows BMR Boot server fails, even though ADK was downloaded and installed successfully
- https://www.veritas.com/support/en_US/article.100074601
Related article
Netbackup BMR (Bare Metal Restore) fails to install ADK 8.1 while creating the first SRT on a BMR boot server, "Installation of Windows ADK failed to due to network failure"
https://www.veritas.com/support/en_US/article.100050443
How to create a Shared Resource Tree (SRT) on a Windows BMR Boot server that does not have internet access.
https://www.veritas.com/support/en_US/article.100053330
Was this content helpful?
Translated Content
Please note that this document is a translation from English, and may have been machine-translated. It is possible that updates have been made to the original version after this document was translated and published. Veritas does not guarantee the accuracy regarding the completeness of the translation. You may also refer to the English Version of this knowledge base article for up-to-date information.