Problem
One or more of the Fibre Channel (FC) SFPs are not detected. The SFP module is a connector between the host bus adapter (HBA) and the cables. The HBA cannot connect to the fabric or to other nodes without it.
Error Message
One or more of the Fibre Channel (FC) SFPs are not connected. Check the cabling. If the cables are connected properly, contact Veritas Technical Support for assistance.
Cause
The SFP modules on the Fibre Channel (FC) adapter are absent, or the SFP modules are broken.
Solution
Check the HBA to ensure that the SFP modules are installed correctly. If the SFP modules are installed, and the cables are connected, contact Veritas (now Cohesity) Technical Support for assistance.
Was this content helpful?
Translated Content
Please note that this document is a translation from English, and may have been machine-translated. It is possible that updates have been made to the original version after this document was translated and published. Veritas does not guarantee the accuracy regarding the completeness of the translation. You may also refer to the English Version of this knowledge base article for up-to-date information.