Veritas Storage Agent service terminates unexpectedly after mapping NetApp LUNs

  • Article ID:100022983
  • Modified Date:
  • Product(s):


The presentation of storage from a NetApp array may cause the Veritas Storage Agent (vxvm) to terminate unexpectedly when using Storage Foundation for Windows (SFW) 5.1.

Error Message

09/01/2008 07:10:00 PM ERROR 1000(0x000003e8) Application Error Faulting application vxpal.exe, version 3.3.1048.0, time stamp 0x48842240, faulting module msvcrt.dll, version 7.0.6001.18000, time stamp 0x4791a727, exception code 0xc0000005, fault offset 0x00009b30


A fix for this issue has been included in Device Driver Installation (DDI) 1 for SFW 5.1.  
Alternatively, a private fix is available from Veritas Enterprise Technical Support. To obtain the private fix, contact Veritas Enterprise Technical Support and reference this article during the call. A support representative will be available to assist in troubleshooting this issue. If it is determined that the private fix addresses the problem the support representative will further assist in obtaining the private fix.
Note: This fix specifically addresses the problem identified above. It has not been fully tested and should be applied in a test environment before placing into production. If the systems are not critically impaired, it is recommended to delay the installation of this private fix until the next scheduled maintenance release. Before applying this private fix, systems may be required to be upgraded to the latest code base. The support representative will help in determining the best course of action.


Was this content helpful?

Get Support