Veritas Enabled Arrays - Array Support Library for Hitachi AMS/WMS Arrays (Active/Passive-Group) on Veritas Volume Manager (tm) 4.x for Solaris


Veritas Enabled Arrays - Array Support Library for Hitachi AMS/WMS Arrays (Active/Passive-Group) on Veritas Volume Manager (tm) 4.x for Solaris


This TechFile provides information about the Array Support Library (ASL) for Hitachi AMS/WMS arrays on Veritas Volume Manager 4.x for Solaris.
For general information about ASLs, see TechNote 249446 (link in the Related Documents section of this TechFile)
Package Name: VRTSHTC-AMSWMS (Array Support Library for Hitachi AMS_WMS)
Package Version: 1.0, REV=07.08.2005.11.58
Supported Arrays: Hitachi AMS/WMS Series (A/P-G)
Supported versions of Veritas Volume Manager: 4.0, 4.0 MP1, 4.1

At the bottom of this TechFile, click on Download Now to download the ASL package VRTSHTC-AMSWMS_solvm40_278145.tar.Z
After downloading the package, extract the file:
# zcat VRTSHTC-AMSWMS_solvm40_278145.tar.Z | tar xvf -
Before adding any ASL package, ensure Veritas Volume Manager 4.0 or later is installed and enabled:
# vxdctl mode
mode: enabled
To install the package:
# pkgadd -d . VRTSHTC-AMSWMS
After the package is installed, you must execute the vxdctl enable command to claim the disk array as a Hitachi array:
# vxdctl enable
Note: In some cases, it has been reported that the installation of the ASL does not take effect and the enclosure or devices is not claimed by vxdctl enable. In such cases, execute the vxconfigd -k command in addition to vxdctl enable.
After executing vxdctl enable, verify that is the output of the vxddladm listsupport command:
# vxddladm listsupport
To ensure that the AMS/WMS arrays work correctly with Volume Manager, verify both the simple and detailed settings for each array port (controller)
Simple Settings:
1. Platform: Solaris
2. Alternate Path: Veritas Volume Manager
3. Failover: Veritas Cluster Server
Detailed Settings:
1. Standard (Default): Enabled
2. Unique Reserve Mode 1: Enabled
3. ASL Report Mode (Active/Active): Enabled
Note: For additional details regarding array settings, contact Hitachi Technical Support

VID                  HITACHI
PID                  DF600, DF600F, DF600F-V
ARRAY_TYPE           A/P-G

Package Information
# pkginfo -l VRTSHTC-AMSWMS
     NAME:  Array Support Library for Hitachi AMS_WMS
 CATEGORY:  system
     ARCH:  sparc
  VERSION:  1.0,REV=07.08.2005.11.58
  BASEDIR:  /etc/vx
   VENDOR:  Symantec Corp.
     DESC:  Array Support library for Hitachi AMS_WMS
   PSTAMP:  VERSION-1.0:08-Jun-2005
 INSTDATE:  Jul 25 2005 14:34
  HOTLINE:  Please contact Symantec Support
   STATUS:  completely installed
    FILES:    5 installed pathnames
                  3 shared pathnames
                  3 directories
                  2 executables
                 24 blocks used (approx)

Terms of use for this information are found in Legal Notices.



Did this article answer your question or resolve your issue?


Did this article save you the trouble of contacting technical support?


How can we make this article more helpful?

Email Address (Optional)