How to verify backup mode for Enterprise Vault (EV) event log using Event ID messages

Problem

Enterprise Vault generates numerous events indicating the setting and clearing of backup mode. The events are informational and vary depending on the version and request. This digest categorizes these events with additional information on how to set and clear backup mode.

Error Message

Each of the categorized events is Informational and can be found in the Enterprise Vault Event Viewer. The events, charted below, differ depending on the installed version of Enterprise Vault.


Note: Two documented methods to set and clear back up mode.

  • Using the Vault Administrate Console to set backup mode. See 000102396
  • Using PowerShell cmdlets in backup scripts to set backup mode. See 000101390

     
Event IDVersionDescription
705810.x, 11.x and 12.xVault stores are put into backup mode from the individual Vault Store Level
705910.x, 11.x and 12.xVault stores are put into backup mode from the Vault Store Group Level
706010.x, 11.x and 12.xVault stores are put into backup mode from the Site Level
707910.x, 11.x and 12.xVault stores taken out of backup mode from the individual Vault Store Level
708010.x, 11.x and 12.xVault stores are taken out of backup mode from the Vault Store Group Level
708110.x, 11.x and 12.xVault stores are taken out of backup mode from the Site Level
4133310.x, 11.x and 12.xIndexes are put into backup mode
4133410.x, 11.x and 12.xIndexes are taken out of backup mode

 

Solution

All the events are informational, and are displayed to identify the current mode of the storage location. They do not require additional action, and these events can safely be ignored.

 

 

Terms of use for this information are found in Legal Notices.

Search

Survey

Did this article answer your question or resolve your issue?

No
Yes

Did this article save you the trouble of contacting technical support?

No
Yes

How can we make this article more helpful?

Email Address (Optional)