At times, it's noticed that the IPMI web interface cannot be loaded whereas the Command Line Interface (CLI) is connecting properly.
"Page not found" when the IPMI IP address is accessed from the web interface.
A reset is required for the IPMI interface
To check the IP configurations for the IPMI:
From the root prompt@Ipmi Cli interface
#ipmitool lan print 3
To reset the ipmi interface
#ipmitool bmc reset warm
#ipmitool bmc reset cold
The web browser now works for the IPMI interface.
Symantec Appliance 5220 2.5.1