CommandCentral Storage fails to discover Brocade Access Gateway switches.

  • Article ID:100027297
  • Modified Date:
  • Product(s):

Problem

CommandCentral Storage fails to discover Brocade Access Gateway switches.

Error Message

FCMGMTExp: Failed to get Vendor and MIB type for the switch . Error:0. Switch vendor may be unknown or switch may not be supporting FCMGMT MIB or network may be too slow

Cause

CCS may be configured to discover Brocade Access Gateway switches directly.  This is not a supported configuration, discovery must occur through a Brocade SMI-S agent.

Solution

See the CommandCentral Storage Hardware Software Configuration Guide for step-by-step instructions on how to setup discovery through SMI-S.  The guide is downloadable from https://sort.Veritas.com/documents


Was this content helpful?

Get Support