Attempting to add a disk to an existing diskgroup generates VxVM vxdg ERROR V-5-1-10128 Configuration daemon error 441
The following vxdg adddisk command may fail when an inconsistency between what is in the kernel differs to the configuration details on disk.
# vxdg -g datadg adddisk datadg05=emc0_00ea
VxVM vxdg ERROR V-5-1-10128 Configuration daemon error 441
Also, if any configuration copies are disabled (for example, due to I/O failures), this command rewrites those configuration copies, and attempts to enable them.
If no diskgroup name is specified, then all diskgroups structures are updated.
In a CVM environment, the flush command must be run from the CVM master node. If the command is run from any CVM slave node, the command silently ignores shared disk groups.
If the "vxdg flush" operation is not successful then a reboot of the server, or a deport and import of the impacted disk group may be required.