Restoring a Windows client with media boot


Restoring a Windows client with media boot


If NetBackup access management is used in your environment, you must provide the appropriate credentials when prompted so that NetBackup can restore the client files.

To media boot a Windows client, do the following.

To restore a Windows client with media boot

  1. Prepare to restore the client.

    See Preparing a client for restore

  2. Create a bootable CD or bootable DVD from the SRT used during the Prepare to Restore.

  3. Insert the bootable CD or bootable DVD into the CD-ROM drive.

    On some systems, you may have to modify the BIOS settings so that the system boots from the CD-ROM drive. Consult your hardware documentation for details.

  4. Turn off the client, then turn it on.

    The following message appears:

    press any key to boot from CD
  5. The system boot and the restore begin with no further intervention required.

Terms of use for this information are found in Legal Notices.



Did this article answer your question or resolve your issue?


Did this article save you the trouble of contacting technical support?


How can we make this article more helpful?

Email Address (Optional)