Problem
Appliance HA Configuration prompts for reissue token when adding second node, even though there is no certificate yet issued for second node.
Example configuration:
nbhaclus - Virtual Name
nb5340n1 - Primary Node
nb5340n2 - Secondary Node
Error Message
- [Info] This operation will add the node nb5340n2 as the partner node and complete the high availability configuration.
For more information, refer to the NetBackup Appliance High Availability Reference Guide.
>> Do you want to continue? [yes, no] (no) yes
- [Info] Reissue token is mandatory as a certificate is already issued to this host. Revoke the existing certificate if it is active and map this host name to the associated host ID.
Cause
A host name mapping entry was erroneously added for the secondary node nb5340n2 to the nb5340n1, nbhaclus entry.
Solution
- Cancel the operation (CTRL+C),
- remove the host name mapping for the second node
- # nbhostmgmt –delete -host <Node2 Hostname> –mappingname <clustername>
Example:
# nbhostmgmt –delete -host nb5340n2 –mappingname nbhaclus
- # nbhostmgmt –delete -host <Node2 Hostname> –mappingname <clustername>
- re-do the add of the second node.
ref: https://www.veritas.com/support/en_US/doc/125171886-130505973-0/v125196287-130505973
If you had proceeded as suggested, and revoked the HostID Certificate associated with the virtual name, refer to the related Knowledge Base Article: While configuring NetBackup 5330 for High Availability, security certificate is revoked on the primary node.