1. Support
  2. Knowledge base
  3. 100023865

TCP Chimney, TCPIP Offload Engine (TOE) or TCP Segmentation Offload (TSO) will cause a transport-level error to be logged resulting in inaccurate hit counts for Accelerator searches

Article: 100023865
Last Published: 2023-09-20
Ratings: 0 0
Product(s): Enterprise Vault

Problem

TCP Chimney, TCPIP Offload Engine (TOE) or TCP Segmentation Offload (TSO) will cause a transport-level error to be logged resulting in inaccurate hit counts for Accelerator searches

 

Error Message

A transport-level error has occurred when sending the request to the server (provider: TCP Provider, error 0 - An existing connection was forcibly closed by the remote host.)

 

Cause

This issue can occur when either TCP Chimney Offload, TCP/IP Offload Engine (TOE) or TCP Segmentation Offload (TSO) are enabled.

TCP Chimney, TCPIP Offload Engine (TOE) and TCP Segmentation Offload (TSO) off loads the TCP protocol stack to a Network Interface Card (NIC).    
 

  • TCP Chimney is Microsoft's software enhancement.
  • TOE is the NIC manufacturer's hardware enhancement.
  • TSO is the equivalent to TOE for some virtual environment configurations.

The TCP Chimney Offload feature is enabled by default in the Windows Server 2003 Scalable Networking Pack.
This update is included in Windows Server 2003 Service Pack 2 and can also be installed on a server running Windows 2003 Service Pack 1.
TCP Chimney Offload is also included in Windows Server versions published after Windows Server 2003.

The following event errors may also be seen:

Event 63 - Error adding installing/upgrading a Customer. System.Data.SqlClient.SqlException: A transport-level error has occurred when sending the request to the server.
V-437-63

Event 99 - An error occured deleting folders. System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-99

Event 116 - An error occurred while The Background SQL tasks. System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-116

Event 117 - Error adding Background SQL to the queue. System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-117

Event 133 - An error has occured when initializing the upgraded/installed Customers. System.Data.SqlClient.SqlException: A transport-level error has occurred when sending the request to the server.
V-437-133

Event 141 - An error occured in ProcessingQueue::QueueingThread. System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-141

Event 148 - GetServerRegistered: Error Getting Server information from the configuration database. System.Data.SqlClient.SqlException: Cannot open database "EVConfiguration" requested by the login. The login failed.
V-437-148

Event 149 - An error has occured when initializing the Servers. System.Data.SqlClient.SqlException: Cannot open database "EVConfiguration" requested by the login. The login failed.
V-437-149

Event 160 - No delegate! System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-160

Event 186 - Error starting the AS processes. System.NullReferenceException: Object reference not set to an instance of an object.
V-437-186

Event 187 - Error starting the ATM processes. System.NullReferenceException: Object reference not set to an instance of an object.
V-437-187

Event 223 - An error occurred. System.Data.SqlClient.SqlException: A transport-level error has occurred when sending the request to the server.
V-437-223

Event 223 -   An error occurred. System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-223

Event 284 - An Error has occured when getting the search results from the database. KVS.Accelerator.Common.Exceptions.SystemBusy: The system is busy.
V-437-284

Event 285 - An Error has occurred while bulk inserting search items
V-437-285

Event 287 - Error accepting a Search Accepted Thread - worked thread (0)
V-437-287

Event 288 - Error adding abandoning a Search. System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-288

Event 289 - Error adding accepting items to queue. System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-289

Event 291 - Error adding sampling a Search. System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-291

Event 292 - Error adding search results to queue: Unrecoverable error processing Search results
V-437-292

Event 293 - Error adding Vault to Search in the queue. System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-293

Event 296 - Error processing bulk search items: Unrecoverable error bulk inserting search items
V-437-296

Event 308 - An Error has occurred accepting a Search
V-437-308

Event 312 - An error has occured when initializing an Search queue. System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-312

Event 323 - An error has occured when initializing the Search Vaults. System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-323

Event 328 - An error occurred executing usp_SearchResults_Add
V-437-328

Event 341 - Error inserting search results
V-437-341

Event 345 - Error saving a search result
V-437-345

Event 390 - Error adding Pausing a Search. System.Data.SqlClient.SqlException: Cannot open database "EVTest" requested by the login. The login failed.
V-437-390

Event 40966 - A program fault has raised an exception.  Exception: A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error:0 - An existing connection was forcibly closed by the remote host.)
V-437-40966

Solution

 

Important Note For Servers In A Clustered Environment Or That Use Network Interface Card Teaming

It is of vital importance to determine if a server is a member of a cluster BEFORE making any changes to the TCP Offload Engine settings described in this article. Examples include Windows Server Failover Cluster nodes and SQL Always On Availability Groups replicas. Some cluster applications require TCP Offload Engine to be enabled on each cluster node or replica for proper functionality. Disabling any TCP Offload Engine settings on cluster nodes or replicas could adversely affect network performance for cluster-aware applications and/or operating systems. As such, it is recommended not to edit any TCP Offload Engine settings for servers that are nodes or replicas in a clustered environment without first consulting the cluster application documentation. If the cluster documentation clearly confirms TCP Offload Engine settings can be changed without any negative effects, then proceed with the changes after creating a plan to roll back the changes if needed. When in doubt, do NOT make any changes to the TCP Offload Engine settings.

Similar consideration should be given to servers using Network Interface Card (NIC) teaming. Some NIC teaming applications require TCP Offload Engine to be enabled on each NIC for proper functionality. Disabling any TCP Offload Engine settings on teamed NICs could adversely affect network performance for cluster-aware applications and/or operating systems. As such, it is recommended not to edit any TCP Offload Engine settings for servers that use NIC teaming without first consulting the NIC teaming documentation. If the NIC teaming documentation clearly confirms TCP Offload Engine settings can be changed without any negative effects, then proceed with the changes after creating a plan to roll back the changes if needed. When in doubt, do NOT make any changes to the TCP Offload Engine settings.

 
Implement the following actions and the below Workaround to better ensure resolution of the issue:
  • Obtain the latest basic input/output system (BIOS) update for the server.
  • Obtain the latest firmware update for the network adapter.
  • Obtain the latest driver update for the network adapter.

WORKAROUND:
The following changes are to be made on the Enterprise Vault, Accelerator and SQL servers.
 
  • Disable TCP Chimney Offload feature

Windows 2003 Server:

 

If the operating system is Microsoft Windows Server 2003, perform the following steps:
 
Warning: Incorrect use of the Windows registry editor may prevent the operating system from functioning properly. Great care should be taken when making changes to a Windows registry.  Registry modifications should only be carried-out by persons experienced in the use of the registry editor application. It is recommended that a complete backup of the registry and workstation be made prior to making any registry changes.
 
1. Click Start, click Run, type Regedit, and then click OK.
 
2. Locate the following registry subkey:
 
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
 
*If any of the below keys are not present, create them.
 
3. Double-click the EnableTCPChimney registry entry.
 
4. In the Edit DWORD Value dialog box, type 0 in the Value data box, and then click OK.
 
5. Double-click the EnableRSS registry entry.
 
6. In the Edit DWORD Value dialog box, type 0 in the Value data box, and then click OK.
 
7. Double-click the EnableTCPA registry entry.
 
8. In the Edit DWORD Value dialog box, type 0 in the Value data box, and then click OK.
 
9. Restart the server.
 
 
Windows 2008 Server:
If the operating system is Microsoft Windows Server 2008 (any version including R2), run the following from a Command prompt:
1. netsh int tcp set global chimney=disabled
 
2. netsh int tcp set global rss=disabled
 
3. netsh int tcp set global netdma=disabled
 
Note: To display current global TCP settings, use the net shell command:
netsh int tcp show global
 
4. Restart the server.
 
Note: Microsoft has identified an issue running the netsh command to set global TCP parameters on Windows Server 2008 and Vista machines.  Some global parameters, such as TCPTimedWaitDelay, can be changed from their default or manually set values to 0xffffffff.  Before running the abo ve command, it is recommended to review the following Microsoft books online article https://learn.microsoft.com/en-us/troubleshoot/windows-server/networking/troubleshoot-network-performance-features-rss-netdma.  U pon completion of the above command's execution, we also recommend reviewing the TCP Parameters noted in the article.

 

  • Disable TOE and Receive Side Scaling
Caution: The instructions in the following two sets of steps will cause the Network Interface Card (NIC) being changed to reset itself.  Such a reset will cause a momentary loss of communications through that NIC.  If the NIC is the only NIC on the system, or is the primary NIC through which remote connections are established, we recommend scheduling a down time to implement these steps from the machine's console.  we also recommend restarting any Journal Task on any Enterprise Vault Journal Archiving server where the Compliance Accelerator Journal Connector (JC) is installed, and restarting the Enterprise Vault Accelerator Manager Service (EVAMS) on any Compliance Accelerator (CA) or Discovery Accelerator (DA) server after these steps are implemented on a CA or DA server, or on the SQL Server hosting the CA or DA databases. Such momentary loss of communications through the NIC can cause Event ID 158 errors to be thrown into the Enterprise Vault Event Log every 10 minutes on the EV, CA or DA servers.
 
1.  From the Control Panel, open Network Connections.
 
2.  Open the properties page for the network connection being used.
 
3.  Click Configure (See Figure 1)
 
Figure 1
 
 
 
4.  On the Advanced tab, change the Value of all 'Offload' and Receive Side Scaling settings to 0,  Disabled or Off (See Figure 2). This includes all entries for IPV4 and/or IPV6.
 
Figure 2
 
 
 
5.  Click OK to save changes.
 
 
  • Disable TSO
1.  From the Control Panel, open Network Connections.
 
2.  Open the properties page for the network connection being used.
 
3.  Click Configure (See Figure 3)
 
Figure 3
 
   
 
4.  On the Advanced tab, change the Value of TSOEnabled to 0. (See Figure 4)
 
Figure 4
 
 
 
5.  Click OK to save changes.
 

 
 
For more information see the following Microsoft knowledge base article
 
  https://support.microsoft.com/kb/942861 
 
For More information for these setting in Windows 2008 see the following Microsoft knowledge base article

https://support.microsoft.com/kb/951037

 

 

Was this content helpful?

Article Languages